點擊圖片放大商品名稱:
規格介紹:
WIKA LH-10
Submersible pressure transmitter
規格介紹:WIKA LH-10
Submersible pressure transmitter
詳細介紹:
For demanding measurement tasks
The LH-10 submersible pressure transmitter offers an accuracy of 0.25 % and, with an ingress protection of IP68, is suitable for permanent level measurements up to 300 m water column.
For the highest media resistance, this submersible pressure transmitter is available in an optional design out of Hastelloy® and high-resistance FEP cable.
Features:
- • Precise and reliable
- • Integrated temperature measurement (option)
- • Design out of Hastelloy® and FEP cable for especially high resistance (option)
- • Ingress protection IP68 permanently up to 300 m water column
更多商品
WIKA LS-1000 Submersible pressure sensor
The fully welded probe, made of stainless steel, works reliably thanks to IP68 ingress protection. A special cable design ensures effective strain relief. The submersible pressure sensor is maintenance-free and offers a long-term stability of 0.2 %. The probe can be operated with a 5 V battery. The energy-saving 0.5 ... 4.5 V ratiometric output signal only consumes < 5 mA and puts so little strain on the battery that it doesn’t need to be replaced for years. Features: • Hydrostatic measurement of levels from 1 to 10 m [3.28 ... 32.81 ft] • Permanently leak-tight • Low total cost of ownership • Certified for use in hazardous areas • Low current consumption
WIKA LS-10 Submersible pressure sensor
For simple measuring requirements. It has been designed to the current demands of the industry and features a 4 ... 20 mA output signal, an accuracy of 0.5 % and a cable from PUR as standard. With IP68 ingress protection, it is suitable for permanent level measurement up to 100 m water column. Features: • Robust • Reliable • Economical
WIKA LF-1 Submersible pressure sensor
Thanks to newly developed special cables, components made of high-alloyed stainless steel and an optional overvoltage protection against lightning, the submersible pressure sensor is perfectly suited for the measurement of liquid levels, also in the outdoor area. A measurement uncertainty of max. 0.5 %, a long-term drift of 0.1 % and slight temperature errors make the LF-1 a reliable measurement solution for the monitoring of storage tanks and bodies of water. The additional analogue temperature output facilitates the compensation of a temperature-induced density error especially at temperatures of up to -40 ... +80 °C [-40 ... +176 °F]. Features: • Suitable for measurements in contaminated and aggressive media • An optimised discharge behaviour and a large pressure port prevent the instrument from clogging and ensure a minimum maintenance effort • Can be used in explosion-protected areas • Developed for wireless applications
WIKA IL-10 Submersible pressure sensor
A hermetically sealed and robust stainless steel case with ingress protection IP68 enables immersion depths of up to 300 m. The submersible pressure transmitter is supplied with a power supply of DC 10 ... 30 V via a suitable isolated barrier and provides an output signal of 4 ... 20 mA, 2-wire. Features: • Suitable for all level measurements in hazardous areas • Explosion protection in accordance with IECEx, ATEX and CSA • Shipbuilding approval in accordance with GL • Ingress protection IP68 up to 300 m immersion depth
