點擊圖片放大商品名稱:
規格介紹:
WIKA TIF50, TIF52
HART® field temperature transmitter
規格介紹:WIKA TIF50, TIF52
HART® field temperature transmitter
詳細介紹:
The TIF series field temperature transmitters, consisting of a rugged field housing, model T32 temperature transmitter and a model DIH display, have been designed for general use in process engineering.
Through the configuration of a sensor with redundancy (dual sensor), on a sensor failure it will automatically change over to the working sensor.
This transmitter has comprehensive cyclic self-monitoring functionality.
Via the display, it is possible to show range alarms as well as MIN and MAX values.
The field temperature transmitter is available in various field-housing variants.
Features:
- • Setting of units and measuring range possible on site (only model TIF52)
- • Different hazardous area approvals
- • The following settings are possible via external software:
- • Duplex sensor, redundant measurement possible
- • Customer-specific characteristic curves programmable
更多商品
WIKA TIF11 Field case for temperature transmitter
Field cases of this series are available in various case variants. Plastic, stainless steel and aluminium versions can be specified. They can be combined with a large number of temperature transmitters. Direct wall mounting is the standard fixing method for these field cases. An optional pipe mounting kit is also available for fitting to pipes with a diameter of 1 ... 2". Features: • Robust case designs • Numerous connection options • Large selection of temperature transmitters can be fitted • Explosion-protected versions
WIKA A2G-70 Ventilation duct sensor
The model A2G-70 registers the relative humidity and the temperature of the air with a capacitive sensor. The sensor signals for both measurement parameters are transmitted to the control/regulation or building automation with analogue output signals (0 ... 10 V, 4 … 20 mA) or digital Modbus® protocol. Features: • Electrical output signal DC 0 ... 10 V or 4 … 20 mA • Modbus® output signal • Simple mounting • Compact and robust design • Maintenance-free
WIKA A2G-20 Air velocity meter
Electrical output signals for both measurands (DC 0 ... 10 V or 4 ... 20 mA; adjustable at the instrument via jumpers) enable the direct connection to control systems or the building automation system. The LC display and the clear menu navigation enable a time-saving and simple commissioning. Features: • Electrical output signal DC 0 … 10 V or 4 … 20 mA, can be selected directly at the instrument via jumpers • Output signal for velocity and air temperature in one instrument • With switching output • Mounting flange for mounting on circular ventilation pipes or rectangular ventilation ducts • Maintenance-free
WIKA A2G-60 Electronic ventilation duct temperature sensor
The model A2G-60 electronic ventilation duct temperature sensor is used for temperature measurement in heating, ventilation, air-conditioning and refrigeration systems and is primarily used in air ducts. The A2G-60 is available with a Pt1000 or Ni1000 sensor, but also with an integrated transmitter (0 ... 10 V or 4 ... 20 mA). Features: • Simple mounting, including mounting flange • Compact and robust design • Direct mounting on circular ventilation pipes or rectangular ventilation ducts • Pt1000 or Ni1000 sensor • Also available with electrical output signal (0 … 10 V or 4 … 20 mA)
WIKA A2G-85 Ventilation duct sensor for CO2 and temperature
WIKA A2G-200 Control panel with integrated room sensor
WIKA T15 Digital temperature transmitter
Via the WIKAsoft-TT configuration software and the model PU-548 programming unit, the model T15 temperature transmitters can be parameterised very easily, quickly and with a clear overview. The WIKAsoft-TT software offers a line recording functionality where the temperature profile for the sensor connected to the T15 can be displayed. Features: • For the connection of Pt100 and Pt1000 sensors in a 2-, 3- or 4-wire connection • For the connection of reed chains in a potentiometer circuit • Parameterisation with the WIKAsoft-TT configuration software and electrical connection via quick connector magWIK • Connection terminals also accessible from the outside • Accuracy < 0.2 K (< 0.36 °F) / 0.1 %
WIKA T16 Digital temperature transmitter
These temperature transmitters are designed for universal use in plant and machine building, and also in the process industry. The model T16 transmitter features diverse monitoring functions, such as sensor break monitoring and measuring range monitoring. Moreover, these transmitters have comprehensive cyclic self-monitoring functionality. Features: • For the connection of all standard thermocouples • High accuracy • Parameterisation with the WIKAsoft-TT configuration software and electrical connection via quick connector magWIK • Connection terminals also accessible from the outside • EMC stability in compliance with the latest standard (EN 61326-2-3:2013)
