點擊圖片放大商品名稱:
規格介紹:
WIKA FLC-EM
Field verificator for electromagnetic flow meters
規格介紹:WIKA FLC-EM
Field verificator for electromagnetic flow meters
詳細介紹:
The field verificator checks the functionality of the sensor, calibrates the 4 ... 20 mA output and tests the input and output by means of a special motherboard.
The FLC-EM is housed in a shatterproof, waterproof and shock-resistant service case. The field verificator is powered with high voltage AC 110 ... 240 V and a nickel-metal hydride (Ni-MH) rechargeable battery in a separate circuit.
Features:
- • Simple, automated verification
- • Autonomous, supply via battery
- • Functional testing of the measuring instrument without interrupting the flow
- • No additional costs for installation and removal
更多商品
WIKA FLC-2200EL Electromagnetic flow meter
The model FLC-2200EL offers a high accuracy and extensive bidirectional flow measuring ranges in a robust, fully welded and potted design. The flange and the outer surface of the sensor are coated with acrylic paint. Thus the measuring instrument has an excellent resistance to water, even with permanent immersion. Features: • Supplied empty-pipe electrode for diameter ≥ DN 50 • Integrated pressure port (on request) • Internal wet calibration for diameter ≤ DN 2000 • Approved for custody transfer (MID MI-001, OIML R49)
WIKA FLC-406 Battery-powered signal converter
The model FLC-406 is a battery-powered signal converter which is perfectly suited for applications without access to mains supply. A battery life of up to 10 years enables maintenance-free and economical operation. Features: • Approved for custody transfer (MID MI-001, OIML R49) • Available as a compact or separated version • Battery-powered (standard), DC 12 ... 24 V (optional) • Module for pressure and temperature readout available
WIKA FLC-608 Hybrid signal converter
The model FLC-608 hybrid signal converter is available in many versions and can also be used in remote applications that do not have access to the power supply network. Up to 200,000 data sets can be saved. With the supplied software, the model FLC-608 can communicate via IrCOM or Modbus RS-485 interface with a PC, laptop or mobile device to program the signal converter and to manage and download measured values. Features: • Power supply via power supply network, battery, power supply network and battery or solar panel • HART® protocol and module for pressure and temperature readout available
WIKA FLC-2300 Electromagnetic flow meter
The model FLC-2300 flow tube has a conical profile, through which the flow is accelerated and the signal to the electrodes is amplified. Due to this special feature, the model FLC-2300 flow meter has a pressure loss of less than 250 mbar at a velocity of 8 m/s. For flow velocities of less than 1 m/s, the pressure loss is always less than 10 mbar. Features: • No upstream or downstream runs required • Approved for custody transfer (MID MI-001, OIML R49) • Accurate low flow measurement • Case from stainless steel with ebonite lining
WIKA FLC-1222 Flow meter
The model FLC-1222 flow meter is a cost-saving solution for flow monitoring. The possibility of a “hot tapping” installation, without having to empty the flow tube, enables the compact measuring instrument to be installed quickly and easily. The instrument can be used as a mobile or as a permanent solution. Features: • Can be used as a mobile or permanent measuring instrument, thanks to “hot tapping” (drilling of pipelines under pressure) • Pressure gauge connection available • Testing of flow meters on-site • No moving parts and no pressure loss
WIKA FLC-2660 Flow meter
The model FLC-2660 flow meter is an efficient solution when low costs and good performance are needed. It is suitable for small pipes between 80 mm and 500 mm with a maximum pressure of 10 bar. Features: • Suitable for small pipes (80 ... 500 mm) • No moving parts
WIKA FLC-2770 Flow meter
The model FLC-2770 insertion flow meter version is a cost-effective and reliable solution for flow measurement. It is available in different lengths in order that it can be matched to different pipe diameters, thus offering a wide range of applications. Liquids with an electric conductivity of at least 5 μs/cm can be measured. Features: • No interference with flow due to low insertion depth • For pipe diameters of up to 2,000 mm
