點擊圖片放大商品名稱:
規格介紹:
WIKA 632.51+8xx
Capsule pressure gauge with switch contacts
規格介紹:WIKA 632.51+8xx
Capsule pressure gauge with switch contacts
詳細介紹:
Wherever the process pressure has to be indicated locally and, at the same time, circuits need to be switched, the model 632.51 switchGAUGE finds its use.
Features:
- • High overload safety up to 50 x full scale value
- • High reliability and long service life
- • Up to 4 switch contacts per instrument
- • Instruments with inductive contacts for use in hazardous areas
- • Instruments with switch contact for PLC applications
更多商品
WIKA DPS40 Differential pressure switch
The differential pressure gauges of the DELTA-line product family are primarily used for the monitoring and control of low differential pressures where there are high requirements in terms of one-sided overload and static pressure. Features: • With one or two adjustable micro switches • Shatterproof window and robust aluminium or stainless steel measuring chamber for increased requirements • Optionally with approvals for hazardous areas • High ingress protection, IP65, for outdoor use and processes with high condensation • Low measuring range from 0 ... 250 mbar
WIKA 736.51+8xx Differential pressure gauge with switch contacts
The model 736.51 capsule pressure gauge is based upon the proven capsule measuring system and is suitable for very low pressures. On pressurisation, the expansion of the capsule element, proportional to the incident pressure, is transmitted to the movement and indicated. Features: • Differential pressure measuring ranges from 0 … 2.5 mbar • Ingress protection IP66 • Case and wetted parts from stainless steel • Version with switch contact for PLC applications
WIKA 700.01, 700.02 Differential pressure gauge
Model 700.01 is particularly intended for the monitoring of differential pressures even in the case of high working pressures in gas and air preparation and supply systems. Model 700.02, the version with a separation diaphragm, is suitable for liquid media and therefore also for water treatment and supply systems. Features: • Differential pressure measuring ranges • Model 700.01: from 0 ... 400 mbar to 0 ... 10 bar • Model 700.02: from 0 ... 160 mbar to 0 ... 2.5 bar • Compact system case from stainless steel, suitable for high working pressures (static pressures) selectable, 100, 250 or 400 bar (model 700.02 up to a max. 100 bar) • Overpressure safe either side to maximum working pressure • System and/or case of indication may be changed locally • Up to 2 reed contacts may also be adjusted and retrofitted locally
WIKA 712.15.100, 732.15.100 Differential pressure gauge
These high-quality gauges are characterised by their compact and robust design and are primarily used for level measurement on liquid gas tanks. Features: • Differential pressure measuring ranges from 0 … 80 mbar to 0 ... 1725 mbar • High working pressure (static pressure) of 50 bar • Overpressure safety either side up to 50 bar • Very compact design • Optionally compact valve manifold with working pressure indication
WIKA 712.15.160, 732.15.160 Differential pressure gauge
These high-quality differential pressure gauges are notable for their compact and robust design and are primarily used for level measurement on liquid gas tanks. Features: • Differential pressure measuring ranges from 0 … 40 mbar to 0 ... 4,000 mbar • High working pressure (static pressure) of 50 bar • Overpressure safety either side up to 50 bar • Scalable measuring ranges (maximum turndown of 1 : 3.5) • Compact valve manifold with working pressure indication (optional)
WIKA A2G-90 Differential pressure gauge with pressure switch
The A2G-90 is ideally suited wherever an analogue indication (e.g. for local control) and a switching output (e.g. for direct connection to a higher-level controller) are required. Features: • Compact indication instrument and pressure switch fitted within a plastic case • Single-pin microswitch (change-over contact) • Switch point adjustable when installed • All connections already preassembled
WIKA 230.15-851 Bourdon tube pressure gauge with switch contacts
The model 230.15 is a bourdon tube pressure gauge with up to 2 Reed contacts model 851. It was created for high purity applications that require discrete monitoring outputs for globally installed systems and life safety applications. Features: • Up to 2 Reed contacts, SPDT • Switch points adjustable on site • Wetted parts from stainless steel 316L and face seal process connections • Electropolished internals and case, internal surface finish up to Ra < 0.25 μm [Ra < 10 μin] • Scale ranges from -30 inHg ... 45 psi to 0 ... 6,000 psi
WIKA PGS23.100, PGS23.160, PGS26.100, PGS26.160 Bourdon tube pressure gauge with switch contacts
Wherever the process pressure has to be indicated locally and, at the same time, circuits need to be switched, this switchGAUGE finds its use. Features: • Also available with case filling for high dynamic pressure loads or vibrations • Instruments with inductive contacts for use in hazardous areas • Instruments with contacts for PLC applications • Safety version with solid baffle wall (Solidfront) available • QR code on dial links to instrument-specific information
