點擊圖片放大商品名稱:
規格介紹:
WIKA F1848
Compression force transducer
規格介紹:WIKA F1848
Compression force transducer
詳細介紹:
The force transducer model F1848 is used because of its redundant output signal very often for monitoring used by safety applications.
Features:
- • Measuring range from 1 t
- • Relative linearity error ±0.15 % Fnom
- • Redundant output signal for safety applications
- • Low installation height, easy to install
- • Ingress protection: IP67
更多商品
WIKA F1270 High‑capacity load cell
The model F1270 high‑capacity load cell with strain gauges is designed for measuring very high loads and has been specially designed for use in container and silo weighing technology. F1270 is also suitable for harsh operating conditions in industrial automation, testing equipments, and production plants where high reliability and long‑term stability are required. Features: • Rated loads from 0 ... 7.5 t to 0 ... 300 t [0 ... 16,535 lb to 0 ... 661,500 lb] • Relative linearity error from 0.04 % Fnom • Rocker column load cell • Robust design and long‑term stability • Encapsulation, hermetically sealed and welded
WIKA F1861 Compression load cell
The model F1861 compression load cell with strain gauges is designed for measuring high static compression forces and loads and has been specially designed for use in industrialforce and weight measurement, particularly in weighing technology. F1861 is also suitable for harsh operating conditions in industrial automation, testing equipments, and production plants where high reliability and long-term stability are required. Features: • Rated loads from 0 ... 10 t to 0 ... 50 t [0 ... 22,046 lb to 0 ... 110,231 lb] • Relative linearity error from 0.03 % Fnom • Self-centring rocker pin with anti-rotation tilting lever pin • Compact design and long-term stability • Encapsulation, hermetically sealed and welded
WIKA F6198 Hydraulic compression force transducer
This compact hydraulic force transducer enables the simple and economical detection and display of forces. Features: • Measuring ranges 0 ... 550 N to 0 ... 310 kN [0 ... 123,645 lbf to 0 ... 69,691 lbf] • Relative linearity error: • ±1.0 ... 1.6 % Fnom with analogue pressure gauge • ≤ ±0.5 % Fnom with digital pressure gauge or pressure sensor • Piston stroke ≤ 0.5 mm [≤ 0.02 in] • Operates without supply voltage • 5-year leak-tightness warranty
WIKA F1102 Hydraulic compression force transducer
The hydraulic force transducer model F1102 serves to easily capture and display forces in applications of limited mounting space. With its plastic piston, the transducer is especially suited to measure compression forces occurring during closing of welding tongs. Features: • Measuring ranges 0 ... 100 N to 0 ... 36 kN • Relative linearity error ±1.0 ... 1.6% Fnom with analogue pressure gauge, ±0.5 % Fnom with digital pressure gauge or pressure sensor (For rated forces below 500 N, the relative linearity error is ±1.6% Fnom for all connected measuring instruments.) • Piston stroke ≤ 0.5 mm • Operates without supply voltage • 5-year leak-tightness warranty
WIKA F1103 Hydraulic compression force transducer
The hydraulic force transducer model F1103, version NS 3 x 6, is suited for regular testing of the clamping force in 3-jaw chucks. It thereby ensures optimum use of the clamping jaws. Features: • Measuring ranges 0 ... 1.1 kN to 0 ... 180 kN • Relative linearity error ±1.0 ... 1.6 % Fnom with analogue pressure gauge, ±0.5 % Fnom with digital pressure gauge or pressure sensor (For rated loads below 500 N, the accuracy is ±1.6 % Fnom for all connected measuring instruments.) • Piston stroke ≤ 0.5 mm, force introduction as total clamping force • Operates without supply voltage • 5-year leak-tightness warranty
WIKA F1106 Hydraulic compression force transducer
Applications for hydraulic force measurement can be found in equipment manufacturing, in device and special machine building and also with measuring and control systems. Features: • Measuring ranges 0 ... 160 N [0 ... 36 lbf] to 0 ... 60 kN [0 ... 13,488 lbf] • Relative linearity error: • ±1.0 ... ±1.6 % Fnom with analogue pressure gauge • ±0.5 % Fnom with digital pressure gauge or pressure sensor • Piston stroke ≤ 0.5 mm [0.02 in] • Operates without supply voltage • 5-year leak-tightness warranty
WIKA F1112 Hydraulic compression force transducer
The hydraulic force transducer model F1112, version NS 3 x 16, is suited for regular testing of the clamping force in 3-jaw chucks. It thereby ensures optimum use of the clamping jaws. Features: • Measuring ranges 0 ... 2.5 kN to 0 ... 470 kN • Relative linearity error ±1.0 ... 1.6 % Fnom with analogue pressure gauge, ±0.5 % Fnom with digital pressure gauge or pressure sensor (For rated loads below 500 N, the accuracy is ±1.6 % Fnom for all connected measuring instruments.) • Piston stroke ≤ 0.5 mm, force introduction as total clamping force • Operates without supply voltage • 5-year leak-tightness warranty
WIKA F1115 Hydraulic compression force transducer
Applications for hydraulic force measurement can be found in equipment manufacturing, in device and special machine building and also with measuring and control systems. Features: • Measuring ranges 0 ... 320 N to 0 ... 120 kN • Relative linearity error ±1.0 ... 1.6 % Fnom with analogue pressure gauge, ±0.5 % Fnom with digital pressure gauge or pressure sensor (For rated loads below 500 N, the accuracy is ±1.6 % Fnom for all connected measuring instruments.) • Piston stroke ≤ 0.5 mm • Operates without supply voltage • 5-year leak-tightness warranty
