點擊圖片放大商品名稱:
規格介紹:
WIKA IBM2, IBM3 Monoblock
規格介紹:WIKA IBM2, IBM3 Monoblock
詳細介紹:
The monoblock has been designed specifically to fit into the small space of control panel and valve battery installations.
The monoblock can be used in a wide range of applications providing high overpressure safety within a large spectrum of temperature ranges.
Features:
- • Increased safety with metal enclosed valve seats and double valve body seal
- • High-quality machining guarantees smooth operation with low torque and low wear
- • Leak-tested tightness in accordance with BS 6755 / ISO 5208 leakage rate A
- • Customisable arrangement with ball and needle valves
- • Customer-specific combination of valves and instruments (hook-up) on request
更多商品
WIKA IBF1 Monoblock
The monoblock has been designed to meet the requirements of the process industry, especially for natural gas and aggressive media applications. Features: • The compact design integrates a shut-off valve to separate the process from the instrument side. • For applications with liquid or dirty media, ball valves are recommended due to easy cleaning of the straight-through internal bore. • The one-piece case minimises the number of leakage points and thereby reduces the risk of media escaping into the environment.
WIKA IVM Monoflange
The model IVM monoflange can withstand high overpressures. The valves are suitable for use in critical applications like refineries or steam generation systems. Features: • Compact design with low number of potential leakage points reduces overall weight • Threaded mounting of bonnets not wetted to avoid seizure and leaks • Smooth valve actuation, even under high pressure, leads to fault-free operation and long service life • Metal valve seat with leak-tested tightness in accordance with BS6755 / ISO 5208 leakage rate A • Instrument version for “fugitive emissions” according to TA-Luft and ISO 15848-1
WIKA IBS3, IBJ4 Monoblock
It is especially well suited to applications in natural gas and aggressive media. Features: • Increased safety with metal enclosed valve seats and double valve body seal • High-quality machining guarantees smooth operation with low torque and low wear • Leak-tested tightness in accordance with BS 6755 / ISO 5208 leakage rate A • Customisable arrangement with ball and needle valves • Customer-specific combination of valves and instruments (hook-up) on request
WIKA PBV-FS Piping ball valve, split body design
The piping ball valve has been designed to meet the requirements of the process industry, especially for natural gas and aggressive media applications. Model PBV-FS valves are used for process shut-off or pressure tapping. Features: • High-quality machining guarantees smooth and low-wear operation with a low operating torque • Compact assembly saves weight and space, reduces leakage paths and guarantees easy maintenance • Fulfils the fugitive emission requirements per ISO 15848-1, tightness class B • Type tested for fire safety in accordance with API 607 • Customer-specific combination of valves and measuring instruments (instrument hook-up) on request
WIKA IBF2, IBF3 Monoblock
The monoblock has been designed to meet the requirements of the process industry, especially for natural gas and aggressive fluid applications. Features: • Increased safety with metal enclosed seats and double body seal • High-quality machining guarantees smooth operation with low torque and low wear • Leak-tested tightness in accordance with BS6755 / ISO 5208 leakage rate A • Customisable arrangement with ball and needle valves • Customer-specific combination of valves and instruments (hook-up) on request
WIKA BV Ball valve
The process version of the ball valve has been designed to meet the requirements of the process industry, in particular for natural gas and aggressive media applications. Features: • High-quality machining guarantees smooth operation with low torque and low wear • Leak-tested tightness in accordance with international standards • Process version with soft or metal-to-metal seat • Large selection of materials and configurations available • Customer-specific combination of valves and measuring instruments (hook-up) on request
WIKA HPNV High-pressure needle valve
The model HPNV high-pressure needle valves have been developed for high-pressure applications of 15,000 ... 60,000 psi [1,034 ... 4,136 bar]. The valve is particularly suitable for control panels, where the space is restricted, or for test benches. Features: • Low-wear design due to non-rotating spindle tip in the bonnet • Low torque and smooth operation of valve handle even at high pressure • Leak-tested tightness in accordance with BS6755 / ISO 5208 leakage rate A • Large selection of materials and configurations available • Customer-specific combination of valves and measuring instruments (instrument hook-up) on request
WIKA HPCV High-pressure check valve
The model HPCV high-pressure check valves have been developed for high-pressure applications of 15,000 to 60,000 psi [1,034 to 4,136 bar]. The wetted parts are suited specifically for applications with natural gas and aggressive media, but also for water and hydraulic oil. Features: • High repeatability and improved sealing through self-centring piston • Redundant sealing: • With O-ring and metal cone • Leak-tested tightness in accordance with BS6755 / ISO 5208 leakage rate A • Metal seat: • No soft sealing material • Long service life • High temperature resistance
