點擊圖片放大商品名稱:
規格介紹:
WIKA B6494
Industrial mV/V measuring instrument
規格介紹:WIKA B6494
Industrial mV/V measuring instrument
詳細介紹:
The B6494 industrial measuring instrument for panel mounting is suitable, through its accuracy and easy readability, for numerous applications.
Features:
- • Dual mV/V display
- • 2x digital input and 4x digital output
- • Integrated multiple signal outputs available
- • Serial interface, RS-232 or RS-485
- • Ingress protection IP65
更多商品
WIKA B1940 Analogue cable amplifier
The B1940 analogue cable amplifier is used to adapt the output signal of strain gauge force transducers to indicators or to a downstream controller. Features: • High accuracy • Input signal: strain gauge measuring bridge; Output signal: 0/4 ... 20 mA or DC 0 ... 10 V • Cable length between amplifier and read-out unit: up to 100 m are possible • Compact design • Ingress protection IP67
WIKA EGS80 Digital limit switch
The EGS80 is used universally, in combination with force transducers of all types or load cells, in force or weight monitoring in conveyor systems, cranes, hoists etc. Features: • Analogue input 0/4 ... 20 mA, 2- and 3-wire • Galvanic isolation, line break (LB) and short-circuit (SC) monitoring • Easy setting of extensive functions on the instrument or via PC software • Two potential-free relay contacts (change-over) with status LED and a freely-programmable analogue output (0 ... 20 mA)
WIKA EZE10 Analogue amplifier
The model EZE10 amplifier is used to adapt the output signal of strain gauge force transducers to digital displays or to a downstream controller. Features: • Good linearity • Voltage and current output • Compact design • Optional, continuous adjustment of zero point and full scale • Optional with adapter board for DIN-rail mounting
WIKA ELMS1 Safety electronics
The model ELMS1 safety electronics is a multi-functional and configurable safety switching device. The electronics consist of a control module and individual function modules that can be mounted next to each other. The modules are connected to each other via a redundant, standard DIN-rail bus. Features: • Certified safety electronics, certified in accordance with DIN EN ISO 13849-1, PLe • Certified system solution incl. force measurement, certified in accordance with DIN EN 13849-1 Cat. 3, PLd • 16 x safe inputs (8 x 4 ... 20 mA analogue inputs, 8 x digital inputs), 2 x safe relay outputs and 6 x safe solid-state outputs (positive switching) • Additional module with ProfiBus®, ProfiNet®, EtherCat® and CANopen® • Complex functionality, easy to configure via PC
WIKA E1930 Industrial mV/V measuring instruments
mV/V measuring instruments as a display for the panel mounting or as a large display E1930 are well suited for numerous applications because of their accuracy and being easy to read. Features: • 5-digit digital display, easy to read up to 50 m • High accuracy: 0.02 % of reading +3 μV • Extensive functions easy to set on the instrument or via PC • Plug-in expansion cards, analogue output, 2 or 4 limit values, serial interface • Ingress protection IP65
WIKA NETRIS®F Radio unit with LoRaWAN®
It uses the licence-free radio standards LoRaWAN® and mioty® as well as Bluetooth®, which, for example, are used at remote measuring locations. Features: • Low operating costs through intelligent measurement control • Easy integration thanks to several radio standards • Numerous application possibilities – also as retrofit • Robustly built, permanently reliable force measurement and weighing • Risk minimisation through condition monitoring
WIKA FE430 Weighing indicator
The high-quality model FE430 weighing indicator can be used universally and is designed for connecting 4- or 6-wire load cells with mV/V output. Features: • Multi tare, auto tare, unit change • Calibration and filter functions • Programmable status feedback and warning sounds for checkweighing • Weighing ticket for PC or printer
WIKA FE630 Hand-held indicator
The model FE630 hand-held indicator is the ideal solution for precise force and weight measurements in mobile test equipment. It is especially suitable for mV/V signals and offers a mobile indication and data logger functionality. Features: • Suitable for mV/V signals • Indication of minimum, maximum and mean values • Graphical representation of the measured value curve • Integrated memory • User-friendly menu navigation
