點擊圖片放大商品名稱:
規格介紹:
WIKA PGT10 USB
Bourdon tube pressure gauge with output signal
規格介紹:WIKA PGT10 USB
Bourdon tube pressure gauge with output signal
詳細介紹:
Nominal size in mm
50
Accuracy class
2.5
Temperature effect
When the temperature of the measuring system deviates from the reference temperature (+20 °C): max. ±0.4 % / 10 K of the span
Features:
- • USB interface for measured-value display on the PC
- • Non-contact sensor (wear-free)
- • Nominal size 50
- • Scale ranges 0 ... 1,6 bar to 0 ... 400 bar
更多商品
WIKA APGT43.100, APGT43.160 Absolute pressure gauge with output signal
The model APGT43 intelliGAUGE® (patent, property right: e.g. DE 202007019025) can be used wherever pressure measurement has to be independent of fluctuations in the atmospheric pressure. The instrument serves for the on-site display with a simultaneous signal transmission to a central control or remote centre. Features: • No configuration necessary due to “plug-and-play” • Scale ranges from 0 … 25 mbar absolute pressure • Easy-to-read analogue display with nominal sizes 100 and 160 • High overload safety, long service life due to metallic media chamber sealing • Media chamber protected against unauthorised access
WIKA PMT01 OEM pressure measuring system with output signal
Model PMT01 is a Bourdon tube pressure gauge with integrated sensors. The instrument offers the usual analogue display, which enables reading the process pressure on-site and in addition provides an output signal (e.g. DC 0.5 … 4.5 V). Features: • Compact and cost-effective integration solution • Scale ranges from 0 ... 400 bar or 0 ... 5,000 psi • Voltage signal, e.g. DC 0.5 … 4.5 V • Nominal size 40 mm [1 ½"], 50 mm [2"] or 63 mm [2 ½"] • Accuracy class 2.5
WIKA DPGT40 Differential pressure gauge with output signal
The differential pressure gauges of the DELTA-line product family are primarily used for the monitoring of low differential pressures where there are high requirements in terms of one-sided overpressure and static pressure. Features: • Transmission of process values to the control room (e.g. 4 ... 20 mA) • Shatterproof window and robust aluminium or stainless steel measuring chamber for increased requirements • Optionally with approvals for hazardous areas • High ingress protection, IP65, for outdoor use and processes with high condensation • Low measuring range from 0 ... 160 mbar
WIKA A2G-15 Differential pressure gauge with electrical output signal
The model A2G-15 differential pressure gauge with electrical output signal is used for monitoring the differential pressure in ventilation and air-conditioning applications. The measuring ranges cover from 0 … 100 Pa to 0 … 6,000 Pa. Compound measuring ranges can be fulfilled from -50 … +50 Pa to -3,000 … +3,000 Pa. Features: • Electrical output signal DC 0 … 10 V (3-wire) or 4 … 20 mA (2-wire) • Simple and fast mounting via threaded bezel • Separated construction of measuring chamber and scale range • Integrated sealing element for direct mounting in a ventilation duct or instrument panel • Available as a built-in or add-on version
WIKA PGT43HP.100, PGT43HP.160 Diaphragm pressure gauge with output signal
The intelliGAUGE® model PGT43HP fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the working pressure of pressure vessels. An additional measuring point for mechanical pressure display can thus be saved. Features: • No configuration necessary due to "plug-and-play" • Scale ranges from 0 … 16 mbar • Wide choice of special materials • For gaseous, liquid and aggressive media, also in aggressive environments, due to all stainless steel construction • Safety version S3 per EN 837
WIKA PGT63HP.100, PGT63HP.160 Capsule pressure gauge with output signal
Wherever very low pressures have to be indicated locally and, at the same time, a signal transmission to the central control or remote centre is desired, the model PGT63HP intelliGAUGE® (patent, property right: e.g. DE 202007019025) can be used. Features: • No configuration necessary due to "plug-and-play" • High overload safety up to 50 x full scale value • Easy-to-read analogue display with nominal sizes 100 and 160 • Low measuring error and influence on function from medium pollution • Measuring chamber protected against unauthorised intervention
WIKA DPGT43HP.100, DPGT43HP.160 Differential pressure gauge with output signal
Wherever the differential pressure must be indicated on site and, at the same time, a signal transmission to the central control or control room is desired, the model DPGT43HP intelliGAUGE® (patent, property right: e.g. DE 202007019025) can be used. Features: • High operating pressure (static pressure) and high overload safety, selectable up to 40, 100, 250, 400 or 650 bar • Measuring cell liquid damping against rapid pressure changes • No configuration necessary due to “plug-and-play” • QR code on dial links to instrument-specific information • Individual, non-linear characteristic curves (e.g. x2 or √x for flow measurement)
WIKA DPGT43.100, DPGT43.160 Differential pressure gauge with output signal
Wherever the process pressure has to be indicated locally and, at the same time, a signal transmission to the central control or remote centre is desired, the model DPGT43 intelliGAUGE® (patent, property right: e.g. DE 202007019025) can be used. Features: • No configuration necessary due to “plug-and-play” • Signal transmission per NAMUR • Differential pressure measuring ranges from 0 … 16 mbar or 0 ... 10 inH2O • Individual, non-linear characteristic curves (e. g. x2 or √x for flow measurement) • QR code on dial links to instrument-specific information
